Striped knits look fantastic, but managing the yarn behind the scenes can quickly turn into a tangled disaster. Over the last year, I’ve finally figured out how to manage things in a way that works for me. I’ve gone from loathing knitting stripes (you may have heard me refer to a now favorite sweater as the “Stripey Bastard” as I was knitting her), to enjoying both the design and knitting aspects of them.
If you’ve ever ended up with gaping holes at your color changes, edges so tight they pucker, or a pile of woven-in ends that makes you want to throw your project across the room (please raise your hand, I know I’m not alone in this!), this one is for you.
Preventing Holes One irritant when changing colors is that little gap that can show up at the color shift. You know the one. It sits between the last stitch of color 1 and the first stitch of color 2. The fix here is simple, and it’s all about how you cross your yarns. When you drop the old color and pick up the new one, you need to first bring the old yarn (color 1) to the left. Then bring the new yarn (color 2) up and over the old yarn (color 1). This traps the yarn, giving an anchor for the strand to loop around when you carry it up for the next stripe. This overlap ensures you avoid the hole.
Carrying Floats Vertically If the stripes are relatively narrow (say, two to four rows), I only cut my yarn if it’s a tight fit where the vertical floats would make the piece uncomfortable. I avoid cutting the yarn because I don’t want to spend more time weaving in ends than actually knitting. Instead, I carry the floats up the side of my work.
The trick here is tension. If the float is too tight, your stitches will scrunch up and warp the fabric at the transition. If you leave it too loose, you can get a sloppy, loose section of stitches at the color change. To avoid this, first give pick up the strand of yarn for the color you are changing to and give it a tug to tension the last stitch, ensuring it matches the shape and size of the stitches around it. Then, carry the strand up, making sure there’s a little give in the float. Using your forefinger, pin the yarn to the back of your fabric to maintain the tension you just fought so hard to achieve, and work two stitches before removing your finger. This ensures the float spans the height of the rows you just knit without pulling anything out of alignment.
Does Knitting Style Matter? Whether you throw the yarn (English), pick it (Continental), or do anything in between, the underlying architecture of the stitches remains exactly the same. The only thing that changes is which hand is tensioning the yarn and doing the crossing. In the video tutorial, I show how to manage the yarn hand-offs regardless of which style you knit with, so you aren't fighting your own muscle memory. (Use the bookmarks to skip to the demonstration that is relevant for you.)
Shift Placement to Avoid the "Jog" If you are knitting in the round, your knitting is actually a continuous spiral, not stacked circles. This means that when you change colors, the beginning and end of the stripe won’t perfectly line up, creating what we call a "jog."
There are many techniques for evening out the jog and making it less noticeable. None of them are perfect, and none of them work in every situation. But for me, the simplest way to minimize that crooked jolt in a stripe is to switch colors two stitches before the beginning of the round. With a ribbed pattern, it’s perfect. With stockinette, it’s as good as any slip stitch technique if you have two or more rows.
See It In Action For those of you who prefer a visual demonstration of techniques, I’ve put together a short 6-minute tutorial that goes through all the techniques I’ve talked through here. If you want to see exactly how to cross the yarns and manage your floats without twisting everything into a knot, you can watch the full breakdown here.
And…fun fact… a new pattern is dropping soon that will be absolutely perfect for putting these techniques to the test!

